Balfour Beatty joint venture tops out final Automated People Mover station at Los Angeles International Airport
18 August 2022
Balfour Beatty, as part of LINXS Constructors, today announces another major milestone at Los Angeles International Airport with the placement of the final structural steel beam required for the Automated People Mover train stations.
Signifying substantial progress in revolutionising how travellers get to and from the fifth busiest airport in the world, the milestone saw LINX Constructors lift the last of nearly 2,000 tonnes of structural steel into position at the largest of six stations being built - the West Central Terminal Area (CTA) station.
Following months of enabling work, LINXS Constructors began foundation placement at the West CTA station site in February 2022. A total of 127 piles were built to support the station, as well as smaller piles to support the nearby pedestrian bridges.
Once complete, the 1.2-million-square-foot station will connect the train system to Terminals 3, 4 and 5, in addition to Tom Bradley International Terminal, via elevated pedestrian bridges
Brian Cahill, Balfour Beatty president in California, said: “Congratulations to the LINXS Constructors team for reaching another monumental milestone on the LAX Automated People Mover project.
“Topping out the final station at the West Central Terminal Area signifies our team’s progress in providing a revolutionary travel experience for worldwide passengers at LAX airport. We look forward to their continued work in completing construction on all stations to begin testing the train system’s driverless vehicles to prepare for public use.”
Justin Erbacci, LAWA chief executive officer, said: “The vision of a fully connected LAX is coming to fruition, and with the last placement of station steel today, we continue to see the transformation unfold behind the skilled hands of so many local workers who are building our future,” said. “This station will be a jewel of the system with visually pleasing digital elements and architecture that will welcome tens of millions of travellers each year.”
Work on the station façades, internal systems and vertical cores is scheduled to continue this year. In addition, the placement of the project’s final pedestrian bridge, connecting the West CTA station to Tom Bradley International Terminal, is scheduled for placement this fall. In total, the structural steel used on the stations, bridges and vertical cores weighs in at more than 9,000 tonnes.
LINXS Constructors continues work on four other APM stations:
- At the Centre CTA station, roofing operations continue following the topping out of structural steel in late May 2022. Structural steel is also being installed to connect the station to pedestrian bridge structures and vertical cores at Terminals 2 and between 5 and 6.
- At the East CTA station, glass walls have been installed on the station platform as exterior work progresses. Structural steel is also being placed for a pedestrian bridge that will connect the station to Terminals 7 and 8.
- At the Economy Parking station, work continues on pedestrian bridge finishes and wall and ceiling exterior panels. As the station nears completion, the team is preparing the location for electrification later this fall.
- At the Intermodal Transportation Facility-East station, which will connect to the future Airport Metro Connector station, fireproofing, escalators and entry-level glass work have been completed. Exterior wall panel installation also continues to progress.
The centrepiece of LAX's Landside Access Modernisation Programme, the $5.5 billion, design-build and public-private partnership (P3) Automated People Mover (AMP) project, is a 2.25-mile electric train system that will transport travellers in and out of the CTA, connecting them to new off-site parking facilities, regional light rail transportation and the Consolidated Rent-A-Car facility.
The APM project started construction in January 2018 and is a critical investment into the infrastructure of Los Angeles as the city prepares to host the 2028 Olympic Games. The APM is expected to relieve congestion within the CTA and in turn the surrounding thoroughfares, thereby reducing emissions and vehicle miles travelled.
To learn more about LAX's modernisation, click here.
Media enquiries to:
+1 (214) 451-1706
www.balfourbeatty.com | follow us @balfourbeatty
All non-media related enquiries should be directed to +44 (0)20 7216 6800 or email@example.com
Notes to editors:
- Balfour Beatty is a leading international infrastructure group with 24,500 employees driving the delivery of powerful new solutions, shaping thinking, creating skylines and inspiring a new generation of talent to be the change-makers of tomorrow.
- We finance, develop, build, maintain and operate the increasingly complex and critical infrastructure that supports national economies and deliver projects at the heart of local communities.
- Over the last 113 years we have created iconic buildings and infrastructure all over the world including: the £1.5 billion A14 improvement scheme - Britain's biggest road project; Hong Kong's HK$5.5 billion world-class harbour theatre project for the West Kowloon Cultural District Authority; and the 12.5-mile $429 million North Metro Commuter Rail line in Colorado, US.
- Balfour Beatty is an industry-leading provider of general contracting, at-risk construction management and design-build services for public and private sector clients across the United States. Performing heavy civil and vertical construction, the company is part of Balfour Beatty plc (LSE: BBY), a leading international infrastructure group that provides innovative and efficient infrastructure that underpins our daily lives, supports communities, and enables economic growth.
- Consistently ranked among the nation’s largest contractors, Balfour Beatty is the No. 6 Domestic Building Contractor in the United States as ranked by Engineering News-Record. To learn more, visit www.balfourbeattyus.com.